Long-term use of industrial water chillers can encounter any kind of failure. For industrial water chillers, if the water cut-off problem is very dangerous, it must be dealt with in time and effectively. If the best treatment time is delayed, serious faults will occur in industrial water chillers, and even the normal operation of the equipment will be caused. The causes of water cut-off of industrial water chillers are different, so the first step is to analyze the specific causes of water cut-off.            In the daily use of industrial water chillers, the heat dissipation of industrial water chillers depends entirely on the water source to take away the hot air. If there is no flow of water source at high speed, then a large amount of heat can not be volatilized in time, resulting in a very fast temperature rise. When the temperature reaches the critical point of high temperature, the industrial cold water opportunity protects itself by shutting down. Therefore, as long as water breakdown occurs, industrial water chillers usually stop running for about 15 minutes to protect the core components of industrial water chillers.            How to deal with the water breakdown?            1. Distinguishing the Reasons for Water Separation            The causes of water cut-off of industrial water chillers are different, so the first step is to analyze the specific causes of water cut-off. If there is a problem with the water source, the operation of industrial water chillers can be restored only by restoring the water supply in time. If it belongs to the fault of water pump, it is necessary to carry out comprehensive maintenance and maintenance for the equipment at this time, eliminate the fault of water pump in time, and conduct comprehensive testing at the same time. Only by ensuring that the pump returns to normal operation can the industrial water chiller be opened normally.            2. Stop maintenance immediately until water flow returns to normal.            When repairing industrial water chillers, the machine must be shut down for operation. Because the industrial cold water in operation will generate more heat, it will also shut down in about ten minutes. Therefore, the maintenance and inspection under the condition of shutdown can avoid the extra high temperature, mainly to ensure that the industrial water chiller is in the normal operating temperature range, which can ensure the normal operation of the industrial water chiller.            There is no need for excessive panic in the face of various industrial water chiller failures. Careful and careful analysis of industrial water chillers with professional equipment can find out the root cause of the failure. Then, according to their specific capabilities, make appropriate maintenance plans, in the shortest possible time, to ensure the re-operation of industrial water chillers.